Home Categories Send inquiry

Modular Steel Cuplock Scaffold System for Construction Industry

Features •Strong carrying capacity. Under normal circumstances, the bearing capacity of a single scaffold column can reach 15kN~35kN. •Easy disassembly and assembly, flexible installation. The length of the steel pipe is easy to adjust, and the fasteners are easy to connect, which can adapt to various flat and vertical buildings and structures. It can completely avoid bolt operation, improve work efficiency and reduce labor intensity of workers. •Reasonable structure, safe use, accessories are not easy to lose, convenient management and transportation, and long service life. Modular Steel Cuplock Scaffold System for Construction Industry British SGB company successfully developed a bowl-lock scaffold (CUPLOK scaffold) in 1976 and has been widely used in the construction of houses, bridges, culverts, tunnels, chimneys, water towers, dams, large-span scaffolding and other projects. The Cup Lock Scaffolding is composed of steel pipe vertical rods, cross bars, cup joints, etc. Its basic structure and erection requirements are similar to ring lock scaffold, and the main difference lies in the cup joints. Specifications There are many kinds of scaffolding on the market, and the cup lock scaffolding is one of the advanced scaffolding. The cup lock scaffold has reasonable structure joints, simple production technology, simple construction method, and a wide range of applications, which can meet the construction requirements of different buildings. Features of cuplock scaffolding Strong carrying capacity. Under normal circumstances, the bearing capacity of a single scaffold column can reach 15kN~35kN. Easy disassembly and assembly, flexible installation. The length of the steel pipe is easy to adjust, and the fasteners are easy to connect, which can adapt to various flat and vertical buildings and structures. It can completely avoid bolt operation, improve work efficiency and reduce labor intensity of workers; Reasonable structure, safe use, accessories are not easy to lose, convenient management and transportation, and long service life; The component design is a modular system with complete functions and a wide range of applications. It is suitable for scaffolding, support frame, lifting frame, climbing frame, etc. The price is reasonable. The processing is simple and the single investment cost is low. If you pay attention to increasing the turnover rate of steel pipes, you can also achieve better economic results. The main components of the hot dip cuplock scaffolding system Vertical (Standard)

The movable top cup on the vertical cup lock scaffold is used to withstand the changing field conditions, while the welded bottom cup is made of high-quality steel.

The one-piece socket has a length of 150mm and is set on the top of each standard part. Used to connect vertically. A 16mm diameter hole is designed on each standard plug and base to prevent the need to add locking pins to standard parts.

Raw Material Q235/Q345
Cup Distance 0.5m/1m/1.5m/2m/2.5m/3m
Diameter 48.3*3.2mm
Surface Treatment Painted/Electro-Galvanized/Hot dip galvanized
Weight 3.5-16.5kg
Iintermediate Transom is a middle bracket used as a cuplock scaffold walkplank to provide safety support. The inward locking is set at one end to prevent horizontal movement during use.
Raw Material Q235
Sizes 565mm/795mm/1300mm/1800mm
Diameter 48.3*3.2mm
Surface Treatment Painted/Electro-Galvanized/Hot dip galvanized
Weight 2.85-16.50kg
Cuplock Scaffolding Diagonal Brace Diagonal Brace is used to fix the lateral support force of the cuplock and connect the diagonal supports between the verticals to improve the stability of the scaffold. Depending on the length, it can be connected to any position of the vertical member of the scaffold.
Raw Material Q235
Sizes 4′-10’ Swivel Clamp Brace
Diameter 48.3*3.2mm
Surface Treatment Painted/Electro-Galvanized/Hot dip galvanized
Weight 8.00-13.00kg
 Cuplock Scaffolding Side Bracket The side bracket is used on the edge of the cuplock scaffold, which is used to extend the extension range to increase the width of the working platform, and it can also support the movement of the middle beam, and a fixed point can also be added on the armrest.
Raw Material Q235
Sizes 290mm 1 Board/ 570mm 2 Board /800mm 3 Board
Surface Treatment Painted/Electro-Galvanized/Hot dip galvanized
Weight 1.50-7.70kg
  The side bracket is used on the edge of the cuplock scaffold, which is used to extend the extension range to increase the width of the working platform, and it can also support the movement of the middle beam, and a fixed point can also be added on the armrest.
Raw Material Q235
Sizes 290mm 1 Board/ 570mm 2 Board /800mm 3 Board
Surface Treatment Painted/Electro-Galvanized/Hot dip galvanized
Weight 1.50-7.70kg
Scaffolding Walk Plank Walk plank is a platform for workers walking on which is connected with scaffolding horizontal. Common materials are wood, steel and aluminum alloy.
Raw Material Q235
Length 3’-10’
Width 240mm
Surface Treatment Pre-continuous galvanized/Hot dip galvanized
Weight 7.50-20.0kg
Adjustable Screw Jack (top) The material is generally Q235B, the outer diameter of the 48 series is 38MM, the outer diameter of the 60 series is 48MM, the length can be 500MM and 600MM, the wall thickness of the 48 series is 5MM, and the wall thickness of the 60 series is 6.5MM. The bracket is installed on the top of the pole to accept the keel and adjust the height of the supporting scaffold.
Raw Material Q235
Surface Treatment Pre-continuous galvanized/Hot dip galvanized
Weight 3.6/4.0kg
Adjustable Screw Jack (base) The material is generally Q235B, the outer diameter of the 48 series is 38MM, the outer diameter of the 60 series is 48MM, the length can be 500MM and 600MM, the wall thickness of the 48 series is 5MM, and the wall thickness of the 60 series is 6.5MM. Install the base (divided into hollow base and solid base) to adjust the height of the pole at the bottom of the frame. It should be noted that to ensure the personal safety of the construction personnel, the distance from the ground during installation is generally no more than 30cm.
Raw Material Q235
Surface Treatment Pre-continuous galvanized/Hot dip galvanized
Weight 3.6/4.0kg
Certificates & Standard Quality Management System: ISO9001-2000. Tubes Standard: ASTM AA513-07. Couplings Standard: BS1139 and EN74.2 standard. Safety requirements for cup lock scaffolding. The operating floor for scaffolding should meet the load requirements of the building design and must not be overloaded. Avoid fixing concrete pipelines, tower crane cables and poles on the scaffolding. Avoid directly stacking large formwork such as aluminum formwork and steel formwork on the scaffolding. Build scaffolding to avoid bad weather. During the construction process using scaffolding, it is strictly forbidden to disassemble parts. Digging operation is strictly prohibited at the bottom of the scaffold. After use, carry out anti-rust treatment to repair deformation.

  • Modular Steel Cuplock Scaffold System for Construction Industry Related Video: